This post has expired! It was posted more than 90 days ago.
<- Back

What is Manual Handling?

Speciality Classification
Start Date
End Date
4 m

What is Manual Handling?

Manual handling includes any activity carried out in the workplace that requires the use of force. It encompasses acts such as:

  • Lifting;
  • Pushing;
  • Lowering;
  • Pulling;
  • Moving;
  • Holding;
  • Restraining;
  • Throwing; and
  • Carrying


How Common are Manual Handling Injuries?

Statistics reveal that of all types of workplace injuries captured in 2017–18, lifting, pushing, pulling or bending accounted for 24%, making manual handling the most commonly reported work-related injury (ABS 2018).

Note: the intention of this article is to provide an overview of manual handling, however, further reading is essential. Refer to the resources listed at the end of the article for more information. It is crucial that you receive appropriate, practical manual handling training and supervision from your facility. You must also follow workplace policies and procedures and be familiar with relevant state/federal Legislation.

Manual handling relates to Aged Care Quality Standards: Standard 5 - Organisation's Service Environment and Standard 8 - Organisational Governance specifically 8(3)a, 8(3)d.



Manual Handling Risks in Healthcare

  • Hazardous manual tasks are the largest cause of occupational injury to nurses and midwives.
  • Musculoskeletal injuries from patient handling account for a considerable number of manual handling injuries to nurses, midwives and other healthcare workers.
  • Insured and uninsured costs of manual handling tasks add significantly to the cost of providing health, aged care and community services.
  • A large proportion of manual task-related injuries are preventable.
  • Shoulder and back injuries incurred by nurses and midwives often result in long-term or permanent disability.

(NSW Nurses and Midwives’ Association 2017; WorkCover Queensland 2019b)

Manual handling can result in significant or irreversible injuries, particularly musculoskeletal injuries, which may include:

  • Soft tissue injuries;
  • Nerve damage or compression;
  • Back and neck injuries;
  • Bone and joint injuries to hands, feet, shoulder, wrist, hip, knee, ankle etc;
  • Ligament and tendon damage;
  • Muscle sprains and strains;
  • Chronic pain; and
  • Acute pain.

(de-Vitry Smith 2018; WHO 2019)


Factors related to manual handling tasks that increase the risk of injury:

  • Shift work, or any work in which you are in a fixed posture for an extended amount of time.
  • Fatigue, which may also be impacted by your type of work.
  • Older age and other factors that reduce physical ability.
  • Previous injury, poor health or a generally low level of fitness.
  • Poor workplace design, e.g. one that is cramped or poorly laid out.
  • The object being moved is in an inconvenient location and of considerable weight.
  • Loads are awkward to grasp and therefore move.
  • Inadequate or no training is provided and staffing is low.
  • Handling a person is involved, therefore the likelihood of strain is increased.

(Better Health Channel 2018; de-Vitry Smith 2018)


Managing Manual Handling Risks

Abide by these four steps to effectively manage hazards associated with manual handling tasks:

  • Identify hazards
    • Inspect the workplace;
    • List the hazards you find;
    • Talk to other workers; and
    • Review information about workplace injuries and incidents.
  • Assess the risk(s)
    • Identify the following in relation to the task:
      • Its weight;
      • The movements involved;
      • The duration of the task;
      • Whether the task requires high or sudden force; and
      • Whether the task involves vibration.
  • Control the risk(s)
    • In order of highest to lowest level of hazard prevention, apply the following:
      • Elimination;
      • Substitution;
      • Isolation;
      • Engineering;
      • Administrative; and
      • Personal protective equipment.
  • Review risk control
    • Implemented control measures should be reviewed and, if necessary, revised.

(WorkCover Queensland 2019a)

Methods to Preventing Injury During Manual Handling

  • Explore ways to minimise lifting heavy items;
  • If possible, lighten loads by breaking them into smaller quantities;
  • Prevent muscle strain and fatigue. This includes warming up before working, taking rest breaks, and allowing time to get used to a new task.
  • Move your feet rather than twisting your back, reduce or avoid bending, twisting, reaching movements;
  • During long shifts change tasks so as to give specific muscles a break;
  • Try not to rush due to lack of time, competing demands, lack of staff or patient needs, you should value your own safety;
  • Use the appropriate equipment and assistive devices correctly, use mechanical aids when possible;
  • Do not use poorly maintained equipment or equipment you have not been trained for;
  • Do not be afraid to ask for help and use teamwork;
  • Watch out for, and support peers to care for themselves in the workplace;
  • Attend and advocate for regular training on manual handling;
  • Abide by workplace manual handling policies and guidelines;
  • Abide by the principles of proper body alignment and body mechanics;
  • Learn how to recognise activities that have the potential for injury and act to reduce the risk; and
  • Avoid performing high-risk activities.

(Worksafe New Zealand; de-Vitry Smith 2018; Education and Training Victoria 2018)

Always question procedures and practices that seem outdated, don’t be afraid to speak up if you perceive a risk to you or your coworkers.



Review Relevant State/Federal Legislation

You should be familiar with (and thus refer to) relevant state/federal Legislation that stipulates the roles of both employers and employees.

All workplaces should have policies and procedures on manual handling and hazard, incident and injury reporting. The Work Health and Safety (WH&S) Act (2011) applies to employees and employers. Breaches of duty under the work health and safety legislation could result in penalties.

Disclaimer: This article is to be used in conjunction with your organisation’s policies and procedures regarding manual handling. This article does not replace the theory of mandatory training regarding manual handling from your organisation. Appropriate theoretical and practical training of manual handling in your workplace should be provided by your employer.


Additional Resources

  • Aged Care Quality Standards: https://agedcare.health.gov.au/quality/aged-care-quality-standards#Standard%205
  • Better Health Victoria, information on workplace safety and manual handling injuries: https://www.betterhealth.vic.gov.au/health/healthyliving/workplace-safety-manual-handling- injuries
  • Safe Work Australia: https://www.safeworkaustralia.gov.au/
  • Workplace OHS provides News and information for Australian Occupational Health and Safety Professionals: http://workplaceohs.com.au/hazards/manual-handling/legislation

Multiple Choice questions Q1. Lifting, pushing, pulling or bending accounted for what percentage of injuries in the recent ABS survey?

  • 25%
  • 24%
  • 42%
  • 52%
  • Q2. True or false: Handling a person is a factor that may increase the risk of injury in the workplace.
  • True
  • False
  • Q3. True or false: Hazardous manual tasks are the largest cause of occupational injury.
  • True
  • False
  • References
    • Australia Bureau of Statistics 2018, Work-Related Injuries, Australia July 2017 to Jun 2018, ABS, viewed 13 September 2019, https://www.abs.gov.au/ausstats/abs(at).nsf/mf/6324.0
    • Better Health Channel 2017, Workplace Safety - Manual Handling Injuries, Better Health Channel, viewed 13 September 2019, https://www.betterhealth.vic.gov.au/health/healthyliving/workplace-safety-manual- handling-injuries
    • de-Vitry Smith, S 2018, ‘Manual Handling in the Workplace’, Ausmed Mandatory Training Module.
    • Education and Training Victoria 2018, Manual Handling, Education and Training Victoria, viewed 13 September 2019, https://www.education.vic.gov.au/school/students/beyond/Pages/manhandling.aspx
    • NSW Nurses and Midwives’ Association 2017, Policy on the Prevention of Musculoskeletal Disorders from the Performance of Hazardous Manual Tasks, NSW Nurses and Midwives’ Association, viewed 13 September 2019, http://www.nswnma.asn.au/wp-content/uploads/2013/07/NSWNMA-Policy-on-the-Prevention-of-Muskuloskeletal-Di sorders-from-the-Pe....pdf
    • Wo rkCover Queensland 2019a, Four Steps to Manage Hazardous Manual Task Risks in the Workplace, WorkCover Queensland, viewed 13 September 2019, https://www.worksafe.qld.gov.au/news/2016/four-steps-to-manage-hazardous-manual-t ask-risks-in-the-workplace
    • WorkCover Queensland 2019b, The ‘Big Three’ Causes of Musculoskeletal Injuries, WorkCover Queensland, viewed 16 September 2019,https://www.worksafe.qld.gov.au/news/2016/the-big-three-causes-of-musculoskeletal-injuries
    • Wor ksafe Mahi Haumaru Aotearoa 2017, Preventing Manual Handling Injuries - Fact Sheet, Worksafe Mahi Haumaru Aotearoa, viewed 13 September 2019, https://worksafe.govt.nz/topic-and-industry/manual-handling/preventing-manual-ha ndling-injuries-fs/
    • World Health Organisation 2019, Musculoskeletal Conditions, WHO, viewed 16 September 2019, https://www.who.int/news-room/fact-sheets/detail/musculoskeletal-conditions


    (Answers: b, a, a)





    Ausmed Editorial Team

    Ausmed’s Editorial team is committed to providing high-quality and thoroughly researched content to our readers, free of any commercial bias or conflict of interest. All articles are developed in consultation with healthcare professionals and peer reviewed where necessary, undergoing a yearly review to ensure all healthcare information is kept up to date. See Educator Profile




What is Manual Handling?
Speciality Classification
Provider Type
4 m
Start Date
End Date
CPD Points
4 m
Price Details
$30.00 p/m
Posted By